Kayayyaki
Kyakkyawan aikin tattalin arziki da muhalli na tsarin karfe enamel fenti
Enamel Paint
Gaba
Juya baya
Ma'aunin Fasaha
| Firamare | Enamel Top Coating | Varnish (na zaɓi) | |
| Dukiya | Mai narkewa | Mai narkewa | Mai narkewa |
| Dry film kauri | 100μm-200μm/Layer | 150μm-250μm/Layer | 80μm-120μm/Layer |
| Ka'idar ɗaukar hoto | 0.15 kg/㎡ | 0.20 kg/㎡ | 0.10 kg/㎡ |
| Taba bushewa | 2h (25℃) | 8h (25℃) | 2h (25℃) |
| Lokacin bushewa (mai wuya) | awa 12 | awa 12 | awa 12 |
| Ƙarfin ƙarfi % | 80 | 85 | 80 |
| Ƙuntatawa aikace-aikace Min.Temp.Max.RH% | (-10) ~ (80) | (-10) ~ (80) | (-10) ~ (80) |
| Ma'anar walƙiya | 28 | 38 | 32 |
| Jihar a cikin akwati | Bayan motsa jiki, babu caking, yana nuna yanayin yanayi | Bayan motsa jiki, babu caking, yana nuna yanayin yanayi | Bayan motsa jiki, babu caking, yana nuna yanayin yanayi |
| Ƙarfafawa | Babu wahalar feshi | Babu wahalar feshi | Babu wahalar feshi |
| Tushen bututun ƙarfe (mm) | 1.5-2.0 | 1.5-2.0 | 1.5-2.0 |
| Matsin lamba (Mpa) | 0.1-0.2 | 0.1-0.2 | 0.1-0.2 |
| Ruwa juriya (96h) | Na al'ada | Na al'ada | Na al'ada |
| Juriya Acid (48h) | Na al'ada | Na al'ada | Na al'ada |
| Juriya Alkali (48h) | Na al'ada | Na al'ada | Na al'ada |
| Juriyar rawaya (168h) | ≤3.0 | ≤3.0 | ≤3.0 |
| Juriya na wanka | sau 2000 | sau 2000 | sau 2000 |
| Juriya mara kyau /% | ≤15 | ≤15 | ≤20 |
| Rayuwar sabis | > shekaru 10 | > shekaru 10 | > shekaru 10 |
| Lokacin ajiya | shekara 1 | shekara 1 | shekara 1 |
| Paint launuka | Multi-launi | Multi-launi | m |
| Hanyar aikace-aikace | Roller, goge ko fesa | Roller, goge ko fesa | Roller, goge ko fesa |
| Adana | 5-30 ℃, sanyi, bushe | 5-30 ℃, sanyi, bushe | 5-30 ℃, sanyi, bushe |
Sharuɗɗan Aikace-aikace
Substrate da aka rigaya
Firamare
Enamel Top Coating
Varnish (na zaɓi)
| Aikace-aikaceIyakar | |
| Dace da na ciki da kuma waje karfe surface kariya, kamar karfe tsarin na bututu, karfe furniture, marine, yi masana'antu, lantarki masana'antu, kayan aiki masana'antu da dai sauransu. | |
| Kunshin | |
| 20kg/ganga da 6kg/ganga. | |
| Adana | |
| Wannan samfurin da aka adana a sama da 0 ℃, samun iska mai kyau, inuwa da wuri mai sanyi. |
Umarnin aikace-aikace
Yanayin Gina
Ya kamata a goge saman, gyara, tattara ƙura bisa ga ainihin yanayin yanayin shafin;Daidaitaccen shiri na substrate yana da mahimmanci don ingantaccen aiki.Ya kamata saman ya zama mai sauti, mai tsabta, bushewa kuma ba shi da ɓatacce, mai, mai, da sauran gurɓatattun abubuwa.
Matakin Aikace-aikace
Maɗaukaki:
1) Mix (A)Primer, (B) wakili na curinge da (C) mai bakin ciki a cikin ganga bisa ga rabo ta nauyi;
2) Cikakken haɗuwa da motsawa cikin minti 4-5 har sai ba tare da kumfa daidai ba, tabbatar da fenti ya motsa sosai.Babban manufar wannan ma'auni shine isa ga anti-ruwa, da kuma rufe da substrate gaba daya da kuma kauce wa iska-kumfa a cikin jiki shafi;
3) Amfanin tunani shine 0.15kg/m2.Mirgina, goga ko fesa fidda kai daidai (kamar yadda hoton da aka makala ya nuna) da sau 1;
4) Jira bayan sa'o'i 24, mataki na gaba na aikace-aikacen don rufe murfin saman enamel;
5) Bayan sa'o'i 24, bisa ga yanayin rukunin yanar gizon, ana iya yin polishing, wannan zaɓi ne;
6) Dubawa: tabbatar da fim ɗin fenti daidai yake da launi iri ɗaya, ba tare da rami ba.
Babban Rufe Enamel:
1) Mix (A) saman rufin enamel, (B) wakili mai warkarwa da (C) mai bakin ciki a cikin ganga bisa ga rabo ta nauyi;
2) Cikakken haɗuwa da motsawa a cikin 4-5 min har sai ba tare da kumfa daidai ba, tabbatar da fenti yana motsawa sosai;
3) Amfanin tunani shine 0.25kg/m2.Mirgina, goga ko fesa fidda kai daidai (kamar yadda hoton da aka makala ya nuna) da sau 1;
4) Dubawa: tabbatar da fim ɗin fenti daidai yake da launi iri ɗaya, ba tare da rami ba.
Bayanan kula:
1) Ya kamata a yi amfani da fenti mai haɗuwa a cikin minti 20;
2) Kula da mako 1, ana iya amfani dashi lokacin da fenti ya kasance mai ƙarfi sosai;
3) Kariyar fim: nisantar takawa, ruwan sama, ba da haske ga hasken rana da kuma zazzagewa har sai fim ɗin ya bushe sosai.
